**ITEM IS RESTRICTED FOR FEDERAL GOVERNMENT CUSTOMERS ONLY**

The Thermal Angel is an in-line, battery-powered disposable, lightweight and completely portable blood and IV fluid infusion warming device. It is specifically designed to address the unique needs (weight, size and space restrictions) of today’s combat medic personnel. Contains two separate modules (listed below) that attach together with Velcro or can be individually carried.

Thermal Angel Deployment Module:

Module to deploy far-forward. Includes all necessary components to respond to a single patient’s fluid warming needs.

Contains one of each:

Thermal Angel Blood and IV Fluid Warmer*
Thermal Angel 9" IV Extension Set*
Thermal Angel Ultra Battery 1
Thermal Angel Ultra Power Cable
Thermal Angel Ultra Deployment Bag
Thermal Angel Ultra Operations Instructions

Thermal Angel Charging Module:

Module to charge the Ultra Battery 1 from a variety of power sources (12-30 VDC; 90-264 VAC). All components are reusable.

Contains one of each:

Thermal Angel Blood and IV Fluid Warmer*
Thermal Angel Ultra Battery Charger (TA-UBC)
Thermal Angel Ultra Vehicle Charger (TA-UVC)
Thermal Angel Ultra Pigtail Charger (TA-UPT)
Thermal Angel Ultra Charging Bag (TA-UCB)

*Thermal Angel Disposable Components required for module "re-load" after each patient use.

The Thermal Angel® is a lightweight battery powered blood and IV fluid warmer that serves as a single point of heated infusion from first patient contact through the entire continuum of care. The un-obtrusive device allows for greater access to the patient. Due to its unique, smart disposable design, the Thermal Angel® directly measures and heats the fluid at 5,000 times per second, regulating an output temperature of 38 degrees C (+/- 3 degrees C) in approximately 45 seconds. The Thermal Angel® heaters adjust automatically in response to changes in flow rate or bolus flows. At just 9oz, the portable fluid warmer can be quickly set up in 30 seconds, and used in a variety of EMS,  fire, flight, military and other field environments. The disposable device does not require any replaceable cartridges or cleaning, and is powered by a reusable battery (TA-UB1). The Thermal Angel® is inserted below standard IV Tubing coming from the bag, before the extension set (TA-9EXTNF) leading to the infusion site. The standard luer fittings accept standard IV line sets.

Features:

• Dimensions: 9in L x 2.8in W x 0.95in H
• Weight: 9.2oz
• Disposable: Single Patient Use. No cleaning, maintenance, or calibration.
• Compact: TA-200 is only 9 inches long and weighs only 9oz.
• Consistant Performance: The Thermal Angel® TA-200 will strive to achieve 38°C (100.4°F) ±3°C at a flow rate of 2 to 150mL/min given a fluid input temperature of 20°C (68°F) with a fully charged TA-UB1 Battery. This temperature is set by the manufacturer and may not be altered.
• Accurate: Measures/adjusts output temperature 5000X per second. With changes in flow rate or input fluid temperature, the Thermal Angel® will require an adjustment period of approximately 15-30 seconds. The Thermal Angel® TA-200 is designed to operate with flow rates of 2 to 150mL/min.
• Long Lasting: A fully charged Ultra Battery 1 (TA-UB1) will last approximately 1 to 2.5 liters of IV fluid at various flow rates with an input temperature of 20°C (68°F) or 1 to 3 units of blood with an input temperature of 10°C (50°F).
• Portable: The Thermal Angel® TA-200 may be left in-line until the IV site or line is changed, up to 72 hours. The Thermal Angel® will perform for approximately 72 hours of accumulated use while receiving power from multiple fully charged batteries.
• Compatible: The Thermal Angel® TA-200 is compatible with any existing IV administration set that utilizes standard luer connections.

This IV extension set is used to connect the Thermal Angel® (item TA-200) to an IV catheter. This short extension helps minimize heat loss at the infusion site.

Features:

• Length: 9in
• For Use With: Thermal Angel® Blood and IV Fluid Warmer (item TA-200)
• Latex-free
• Sterile
• Disposable
• Needle-free injection site
• Non-pyrogenic

The Thermal Angel® Ultra Battery 1 can be used with the Thermal Angel® Blood and IV Fluid Warmer.

Features:

• Dimensions: 6.4in L x 3.2in W x 1.7in H
• Weight: 1.25lb
• For Use With: Thermal Angel® Blood and IV Fluid Warmer (item TA-200)
• Charging options include the Thermal Angel® Ultra Pigtail Charger (item TA-UPT) and Thermal Angel® Ultra Vehicle Charger (item TA-UVC)

• The Thermal Angel ultra battery charger (TA-UBC) runs on AC power and charges the ultra battery 1 (TA-UB1)
• Charges the ultra battery 1 with AC power
• Works in the US and most international environments

• The ultra power cable was designed to provide a shorter, lighter power cable for those EMS caregivers with space or weight limitations
• Ultra battery 1 (TA-UB1)
• Standard battery (TA-BCE)
• The ultra power cable has color coded ends to assist in connecting it to the Thermal Angel (TA-200)
• The ultra power cable can be purchased separately, or it is included in the ultra emergency pack (TA-UEP)