The PAX PCI Clip-In System Set 2 clip rail is available in one length and can be adjusted individually. Suitable for all frame sizes.

Features:

• (20) PAX Ampoule Clips
• (1) PAX Clip Rail
• (2) PAX Frame Clips
• Use with PAX Holders with Clip-in compatibility

The PAX Ampoule Holder X-Large Clip-In Module is based on the XL module and matches the PAX Organizing System. The PAX Clip-In System is mounted in the bottom and in the lid on the plastic plates and equipped with the PAX ampoule clips as required. The middle wall to be fixed in the middle or on the opposite side accommodates the syringes and cannulas and at the same time protects the ampoules at particularly high pressure from the outside. This ampoule kit is equipped with fleece strips. The number of ampoules to be accommodated varies between 40 and 100, depending on the equipment and desired clarity.

Note: Ampoules, Vials and Syringes not included.

Features:

• (1) module Ampullarium XL Clip-In POS including center wall
• (2) PAX clip rail frame XL (approx. 306 x 222 mm)
• (8) PAX clip foot, 8x PAX installation foot, incl. screws
• (2) PCI labeling plate XL (approx. 330 x 230 mm)
• (120) PAX clip
• (6) PAX clip rail
• (12) PAX frame clips

Specifications:

• Gray
• PAX-Tec Material
• 2.2lb
• 13in L x 4in W x 9.5in H

In the modular system of the P5/11, this ampoule drawer corresponds to the space of 2 transparent modules "L" and is also held in place by a magnet. The Ampoule Holder P5/11 L Clip-in 2.0 currently offers space for most medications, up to 140 ampoules. The center wall accommodates syringes and cannulas and protects the ampoules against pressure from the outside. The handle in the color red, is removable.

Features:

• Gray
• PAX-Rip-TEC
• Holds Ampoules
• 14in L x 4in W x 12in H
• 2.6lb